CV DRIVE ASSEMBLY FOR IMPORT DRAG

A CV drive assembly stronger than stock replacement CV joints and axle assembly are now available for the import drag racing market from J.W. Performance Transmissions. The replacement CV joints will fit the Honda Civic, Honda Accord and Acura Integra models. The new CV Drive Assembly retails for less than $300.

For details on this product contact J.W. Performance Transmissions at

1826 Baldwin St.
Dept. DRO
Rocklege, FL 32955.

Call 407-632-6205
or
contact them at
jwperf@digital.net

RACE-DESIGN HYDRAULIC LIFTERS FROM CRANE
Crane Cams has developed a new series of race-design hydraulic lifters for competition and high performance street use. They feature a precisely metered accelerated leak-down rate with micro-tolerance internal valving to provide increased performance without excessive operating noise common to "fast bleed" lifters. They are available for most popular V-8 engines.

For more information,

phone 904-258-6174
or
go to the website at
www.cranecams.com

For a postpaid copy of the latest catalog, send $5 to

Crane Cams, Inc.
Dept. DRO
530 Fentress Blvd.
Daytona Beach, FL 32114.

17x33 RACING SLICK FROM PHOENIX
Phoenix Race Tires has introduced a 17x33 drag slick for use especially in the Super Comp, Super Gas and Pro Stock classes. The F/X rear slick line is available in actual diameters from 25.8 to 33.7 inches to fit rims from 4.5 to 16 inches wide. Compounds range from soft to medium/hard. The company's tubeless drag fronts are available in six sizes, from 4.0/22.5-15 to 8.45-15.

Contact

Phoenix Race Tires,
Dept. DRO,
2618 South I-35, Suite 201,
Oklahoma City, OK 73129

Call 405-677-3805
or
visit the website at
www.phoenixtire.com

FORD REAR END KIT FROM MARK WILLIAMS
Ford Mustangs and pickups equipped with 8.8-inch rear ends can benefit from improved traction and driveline reliability with this exclusive new package from Mark Williams Enterprises. The kit contains a pair of heavy-duty 31-spline M-W MasterLine™ axles, wheel studs, a C-clip eliminator kit with Timken™ bearings and a heavy-duty outboard seal, plus a Posi-Traction® unit. Installation is entirely bolt-on, with no welding or fabrication necessary. Options available include updating the wheel studs to the 5/8-inch thread drive studs, and special flange diameters for disc brake kits.

For additional information call

1-800-525-1963
or
visit the website at
www.markwilliams.com

Send $5 for the catalog and a handy plastic gear ratio computer to

M-W Enterprises, Dept. DRO
765 South Pierce Ave.
Louisville, CO 80027.

NEW 440 CHRYSLER RACING PISTONS FROM CP PISTONS

CP Pistons' new super lightweight racing piston is now available for big block Chryslers. At weights in the low 600 gram range, the specialty forged aluminum piston is available for any bore, stroke or length combinations. Can be ordered to fit any factory wedge cylinder head or aftermarket versions, including the Indy 13-degree and Brodix B1.

For more information contact

CP Pistons:
11895 Woodbury Rd., Dept. DRO
Garden Grove, CA 92843.

Phone 714-590-3800.

BILLET KRYPTONITE CRANKSHAFTS FROM L.A. ENTERPRISES
L.A. Enterprises has introduced their billet Kryptonite Crankshafts for a wide range of drag racing applications, including blown fuel applications. The high strength billet cranks are designed for both durability and weight reduction, and include counter weight shaping for reduce windage, stroke indexing within .001-inch and the highest quality finishes and tolerances available. Crankshafts are available for small and big block Chevy, Ford, and Chrysler engines. Many sizes are stocked, and custom orders are available with fast turn around times.

Contact L.A. Enterprises at

735 W. Taft Ave., Dept. DRO,
Orange, CA 92865.

Phone 714-921-8643
or
website: www.crankshaft.com

Copyright 1999-2001, Drag Racing Online and Racing Net Source