6/9/03

UPGRADE GEN 7+ CONTROL

ACCEL/DFI's Version 3.2 Upgrade of the Gen VII System and Calmap Software is now available, offering custom Standard & Pro programs to fit your personal application. The Gen 7+ System not only provides precise control of all aspects of fuel delivery and ignition timing, but also offers features and benefits that have never been available from a programmable engine management control system before. This system provides enhanced idle air control including preset control values for most engine combinations, and improved fueling control for street and race applications. The 2003 Gen 7+ System provides crisper or heightened throttle response for single and multiple throttle body induction systems, improved cold weather start-up, and enhanced communications for faster program file uploads and downloads. Also, its water-resistant enclosure and main harness connections allow the Gen 7+ Electronic Control unit to be mounted in the passenger compartment or under hood. Other features include enhanced knock control, enhanced acceleration enrichment management, and improved O2 control for Wide Band and Standard Feedback Systems. For more information, please visit www.mrgasket.com.

GREEN STUFF® ABSORBENT

With its extremely light weight and extraordinary holding power, Berryman GREEN STUFF® Absorbent has offered the National Hot Rod Association a new level of efficiency and cost effectiveness for the quick cleanup of oil spills at tracks on the NHRA POWERade® Drag Racing Series. Non-toxic and non-biodegradable, Berryman GREEN STUFF Absorbent passes tests for hazardous waste disposal at approved landfills and for approved incineration operations. In addition to the race track, there are many more uses for Berryman GREEN STUFF Absorbent including, but not limited to: general automotive, oil and lube shops, car care facilities, industrial manufacturers and industrial/plant maintenance and waste management. To learn more visit their website at www.berrymanproducts.com or contact the company at 800-433-1704.

'POWER SQUEEZE' VENTURI TUBE

"Power Squeeze" venturi tubes are designed to boost low- and mid-range torque, without losing top end power. Especially effective in 3-inch and larger systems, the venturi effect makes it possible to fine-tune for maximum torque and horsepower. The Power Squeeze venturi slides into your existing collector or pipe and bolts in. For more information contact Car Chemistry, Inc., Dept. DRO, P.O. Box 950, Midlothian, TX 76065 or phone 972-775-8124.

NITROUSWORKS 2-STAGE POWERWING SYSTEM

NitrousWorks™, a Barry Grant Inc. company, introduces the better PowerWing(tm) kit for EFI engines! Using the acclaimed PowerWing™ nozzles, the new NitrousWorks two-stage system (P/N 13100) provides a controlled delivery of nitrous to any engine, smoothing cylinder pressure and easing power spikes. The system easily installs in the inlet tract ahead of the throttle body. It reduces driveline shock and wheel spin for more consistent e.t.'s.

The kit uses a Wide Open Throttle (WOT) switch and a momentary switch to control the activation of the two nitrous stages. The kit can supply a modest 50 horsepower hit in two 25 HP stages for small displacement engines without engine or driveline upgrades. For upgraded small displacement engines or unmodified V8 engines, the 2-stage system can supply up to 150 HP. The NitrousWorks 2-stage PowerWing™ system comes with 2 PowerWing™ nozzles, calibrated jets, all mounting and wiring hardware, plumbing, switches, solenoids and a 10 lb capacity bottle. NOTE: The MSD RPM Window switch is highly recommended to override the nitrous system when engine speed exceeds or falls below preset RPM levels. For complete information contact: Nitrous Works, Dept. DRO, 1450 McDonald Road, Dahlonega, GA 30533. Telephone 706-864-8544, or send $5.00 for the latest Barry Grant Inc. catalog.