6/7/04

Go Formal with a “BOWTIE” Wire Loom Kit

The ultimate wire loom kit for the Chevy™ enthusiast! Licensed by GMSPO exclusively to Made For You Products, the “Chevy Bowtie” loom kit fits on center bolt valve cover type engines. Each unique kit separates, organizes, and supports your ignition wires while protecting them from heat and vibration. Manufactured from Zytel™ aircraft quality nylon, these components are non-conductive, impervious to automotive fluids, and will not fade, distort, melt, or discolor - perfect for performance and showing off your engine compartment. Complete with stainless steel hardware, two Bowtie separators, 4-each 2-place, and two each 4-place separators so you can loom all the way to the distributor, not just at the valve cover. Kits are available in several popular colors. Lifetime Warranty. For further information, contact Ross Kroenert, Made For You Products, cross.k@cox.net.

Greetings from Winnebago Industries, Inc.!

35th WIT Grand National Rally
July 18 – 23, 2004

The Winnebago-Itasca Travelers (WIT) 35th Grand National Rally is right around the corner! Celebrating “Winter Wonderland” in Iowa, approximately 1,500 Winnebago Industries motor homes will converge on Forest City for a week long rally of seminars, vendor displays, entertainment, tours, classes and WIT fellowship. With an estimated 3,000 people attending this year’s rally, it’s obvious the daily news of increasing gas prices isn’t stopping them from traveling!

If you’re interested in more information on this year’s Grand National Rally, please call Kelli Harms at 641/585-6731 or e-mail kharms@winnebagoind.com.

Diy Exhaust Tubing From Classic Tube

CLASSIC TUBE has what you need! With their array of straight and pre-bent stainless steel tubing you can easily fabricate your own custom system at home. This tubing is the solution for almost any automotive project, from street rods and street machines to replacing a stock system. All of CLASSIC TUBE’s exhaust products are manufactured from T-304 (16-gauge) brushed stainless steel which will never rust. CLASSIC TUBE’s exhaust tubing is available in straight lengths by the foot or in U-bends, J-bends, 90, 45 or 15-degree bends. Outside diameters range from 3/4-inch to 3-inches for your custom built system. CLASSIC TUBE also manufactures stainless steel and steel pre-bent tubing for fuel, transmission, brake, vacuum, choke and hydraulic lines. Check out all their tubing and fluid transfer products at www.classictube.com. For additional information contact CLASSIC TUBE, 80 Rotech Drive, Lancaster, NY 14086, 800-882-3711, In NY 716-759-1800, Fax: 716-759-1014.