12/8/06
NEW WILSON MANIFOLDS V-FORCE EFI
Unlike most fuel injection conversions, which require dozens of parts including a new intake manifold, the V-Force system is an all-inclusive fuel injection solution that integrates 
cutting edge Wilson airflow technology and turnkey EFI reliability in one slick-looking package.
Wilson Manifolds' engineers developed the V-Force high-flow throttle body using the latest computer modeling software to produce a design that yields maximum flow per square inch of cross-sectional area. Eight fuel injector bosses (injectors ranging from 30-lb/hr to 160-lb/hr available separately) are designed to introduce fuel into the air stream for maximum atomization, and custom Wilson billet fuel rails and stanchions make installation a snap. The V-Force EFI features a standard 4150-style flange, so it will work on all popular 4-barrel intake manifolds.
For more information visit them at: www.wilsonmanifolds.com
NEW PADDLE SHIFTER FOR ANY AUTOMATIC
Now you can have the same precision, performance, and jaw-dropping style in your own car, with the new Formula1 Smart Shift system from RetroTek Speed.
The shifter mounts between the hub and the wheel, and is designed for easy fingertip operation without taking your hands off the wheel. The unique design is 
compatible with any three, five, six or nine bolt steering wheel flange, allowing you to maintain your factory or aftermarket wheel. A quick pull on the paddle is all you need to upshift or downshift. The patent-pending design is rated at over 1-million cycles, and a high power, short range RF transmitter sends signals to the control module, meaning there are no wires to hook up. Billet aluminum construction makes the Forumula1 Smart Shift rugged yet attractive, and polished or anodized finishes are available.
To preview all of RetroTek Speed's high-performance fuel systems, shifters, tuning solutions and hardcore hardware, email retrotekspeed@sbcglobal.net, or contact them at RetroTek Speed, 469 Harrison St. Unit E, Corona, CA 92879 or call 951-737-2006.
DROP YOUR PONY THE RIGHT WAY
The NEW 2005-07 BMR S197 Lowering Package (P/N LP001) comes complete with everything you need to drop your Mustang 1-1/2 to 2-inches the RIGHT WAY, resulting in improved looks and improved suspension geometry.
The new BMR 2005-07 Mustang Lowering Package includes springs, an adjustable panhard rod, control arm relocation brackets, front camber bolts, and upper strut mounts. BMR Springs are specifically engineered around OE specs to maintain OE ride quality. Since the S197 Mustang is equipped with a panhard rod to locate the rear end in the chassis, altering ride height can shift the rear end to the driver's side up to 3/8-inch. An adjustable panhard rod is necessary to re-center the rear end. BMR panhard rods are equipped with grease fluted polyurethane bushings.
To preview all of BMR’s high-performance performance suspension parts, please visit www.bmrfabrication.com
 |
|
|
|
 |