3/6/06
MAKE PARTS SHINE
WITH ALUMINA ALUMINUM CLEANER
Alumina is an aluminum oxide remover and cleaning agent that contains no fluorides, acids, caustics, or solvents. It's fast acting, biodegradable, and totally safe to use with plastic, rubber, and PVC. Simply immerse the 
part you wish to clean in the Alumina solution and let it sit for 20 minutes. Then remove the part, rinse thoroughly with warm water, and all the oxidation, tarnish and other deposits will be gone.
Alumina is available in one- and five-gallon bottles, and 55-gallon drums. The system works extremely well on trim pieces, engine components, accessory brackets, and other aluminum parts that deteriorate over time and are difficult to replace. Alumina also works great as prep for polishing or paint.
For more information visit www.orisonmarketing.com.
GO FASTER AND SAVE FUEL WITH QUICK FUEL TECHNOLOGY
The new Throttle Shaft Conversion Kit includes Teflon-coated throttle shafts, Teflon bearing ribbons, and three different linkage rods that control when the secondary venturies open. The result is reduced throttle effort, easier pedal modulation, and smoother acceleration. The Teflon bearings are a benefit in high-dirt environments, where the Teflon acts as a sacrificial wear component and preserves hard parts over time.
A stock secondary connecting rod allows the primary blades to open 40% before the secondary venturies open. QFT includes a new stock rod, along with a progressive rod that opens the secondaries when the primary blades are 60% open.
For more information, visit www.quickfueltechnology.com
WARHAWK® LS7X 12° CYLINDER HEADS FROM WORLD PRODUCTS
Combining the best attributes of the LS7 and C5R heads, plus other key improvements, the new Warhawk® LS7X will be a necessary component in achieving maximum power and reliability with any LS-series engine.
A major improvement is the addition of provisions for two extra head studs per cylinder.
Designed with massive 255cc intake port and fitted with big 2.200" intake and 1.625" exhaust valves, the Warhawk® LS7X has exceptional flow characteristics. The heads are available with several different spring packages for use with a range of cam profiles. They are also available in bare casting form.
For more information write to World Products, 51 Trade Zone Ct., Dept. DRO, Ronkonkoma, NY 11779 or visit www.worldcastings.com.
 |
|
|
|
 |