6/8/06
RHS™ CLEAN CAST TECHNOLOGY™ DELIVERS POWER BY DESIGN
RHS™ designs, engineers, casts and machines its cylinder heads from the same location, a process dubbed “vertically integrated” manufacturing, which ensures high-quality standards are maintained from concept through delivery.
With RHS™ Clean Cast Technology™, gone are the days of purchasing cylinder heads, only to discover that extensive final machining is required for optimum performance. This exclusive process ensures that chamber and runner volumes, port-to-chamber surface transitions, water jackets and related design features hold extreme tolerances. RHS™ Clean Cast Technology™ achieves “as cast” standards not possible with traditional manufacturing.
For more info visit www.racingheadservice.com.
THE G2X GPS BASED DATA LOGGER FROM RACEPAK AND MSD IGNITION
The G2X, PN 11100, is a GPS based motorsports data acquisition system that is ideal for racers looking to track their lap times, lateral and acceleration G-forces, engine rpm and more. Since the system is GPS based, there is no need to set up beacons or receivers for 
timing functions.
If you want to expand your acquisition capabilities, you can easily add sensors such as driveshaft speed, throttle position or other steering and braking sensors. Additional sensors can easily be installed with Racepak's V-net technology!
The G2X is available through your MSD dealer. For more information, contact MSD at 915 855-7123.
NEW TEMPERATURE MODULE EXTENDS CAPABILITIES OF HYPERPAC PERFORMANCE AUTOMOTIVE COMPUTER
The new temperature module can monitor and record temperatures ranging from –300 to 2400 degrees F. The kit includes a high quality thermocouple sensor that provides exceptional accuracy and repeatability under continuous use. The temperature module reads the sensor, processes the information, and then feeds the results up to the HyperPAC where it can be displayed and recorded. The user can also set alarms to alert the driver when the temperature is above or below pre-programmed limits.
The temperature module kit includes an EGT sensor with a shielded harness, an extension cable, a threaded bung, a serial cable, and a HyperPAC interface cable.
For more info visit www.hypertech.com.
AVOID BROKEN RINGS WITH THIS PROFORM® UNIVERSAL PISTON RING INSTALLER
This recent addition to the ever expanding PROFORM® line of specialty engine-building tools will compress rings to fit 3-7/8 to 4-3/8-inch bore sizes. The kit includes an adjustable clamp and a ring compressor.
To help prevent ring breakage during piston installation, simply slide the Universal Piston Ring Installer over the rings and piston, tighten to size, and smartly tap the piston home. This inexpensive PROFORM® ring installer is a must have for your toolbox!
For additional information visit www.proformparts.com
 |
|
|
|
 |