8/8/06
POWERGLIDE TRANSMISSIONS ENGINEERED FOR ULTIMATE DUTY DRAG RACE APPLICATIONS
The TCI® PRO-X™ Powerglide Transmission, is compatible with up to 2800 horsepower applications. Available with 1.98, 1.80 or 1.65 Straight-Cut 12DPI Super Set Planetaries, 
these state-of-the art transmissions deliver reliable service in racecars regularly running 6.70-seconds at over 220 mph in the quarter mile.
Highly dependable, TCI® triple-checks and AxiLine computer dyno-tests these transmissions, which include the best of all race-oriented parts, including the TCI® PRO-X™ Ringless-Style Gerotor Pump and X-Wide Kevlar Band, HDT Coated Aluminum Deep O-Ringed Pan and Hi-Flow Filter System to ensure proper fluid circulation.
For more information, visit www.tciauto.com
E85 FLEX FUEL CONVERSION
RACEPUMP
NOW E85 CERTIFIED
E85 can actually help make horsepower, thanks to a higher octane rating than gasoline. Now new car owners aren't the only ones who can take advantage of the E85 phenomenon, thanks to the innovative minds at RacePumps.
Available for both carbureted and EFI small and big block Chevrolets, the complete RacePumps line of high-performance fuel pumps is now fully E85 flex fuel compatible. That means you can run straight gasoline, E85, or a blend of both. The innovative RacePump design has no diaphragm, the body is hard anodized billet - which is compatible with all known fuels - plus the seals are compatible with E-85.
For more information visit www.racepumps.com or call 336-476-9583.
LIGHTER, FASTER & STRONGER: A-BODY TUBULAR A-ARMS FROM BMR
BMR's complete A-Body suspension line, including these A-Arms are 10 pounds lighter and twice as strong as stock pieces.
BMR's Tubular A-arms can be used with O.E. style coil springs and most popular shocks, or for maximum handling, are compatible with QA1 coil-over kits. Pre-assembled with low-deflection polyurethane bushings for the ultimate suspension control, BMR tubular A-Arms resist deflection and provide a precise steering feel you just can't get with stock suspension.
For more information visit www.bmrfabrication.com
SIT LOWER & HANDLE SHARPER - 2005/06 MUSTANG DROP SPRINGS FROM BMR
Thanks to track-tested progressive spring rates and a lowered center of gravity, BMR drop springs increase a vehicle's cornering capabilities dramatically. BMR springs are 
available in two variations. Part number SP009 will lower the front 1.25" and the rear 1.75", while part number SP010 lowers the front 1.5" and the rear 2". Both kits are designed to "level" the car. BMR rear springs retain the factory "hourglass" shape designed by Ford engineers. This important feature provides a "variable natural frequency" in the spring to help counteract damaging wheelhop. BMR Springs are made in the USA out of top-quality materials, and are powdercoated for maximum protection and style.
For more information visit www.bmrfabrication.com
 |
|
|
|
 |