9/22/06
FEED THE BEAST: Cutting Edge Gen III Induction Technology From Wilson
The system starts with Wilson's new Billet Bank Intake manifold, using an F1-style "breadbox" design housing tuned-length runners. Designed with state-of-the-art solid modeling software, the cylinder banks are machined from billet 6061-T6 aluminum. Each manifold is heli-arc welded for precise fit and structural integrity, and CNC ported for maximum power. Once the manifold is constructed, “The Beast” begins to take shape. Wilson engineers add a patented Nitrous Pro-Flow V-Force port injection nitrous system, which is adjustable from 150-500 horsepower.
For more information check out Wilson’s website at www.wilsonmanifolds.com.
GIVE YOUR IMPALA MAXIMUM CONTROL
Now your 1991-96 Impala can launch harder, handle better and look cooler with the new B-Body Billet Control Arms from BMR Fabrication.
The newest addition to BMR's complete line of Impala SS suspension parts are literally the strongest lower control arms ever offered for the B-Body. CNC machined from billet 6061 T6 aluminum alloy, the black anodized arms look so good it's almost a shame to bolt them under the car! Carved from 2" x 2.5" solid billet, the arms are available stock length or stretched 3/4-inch to center the wheels in the wheel wells. New greaseable, low deflection, high-strength polyurethane bushings with thick-wall sleeves are also included
For more information visit www.bmrfabrication.com
NEW HARDCORE MUSTANG CONTROL ARMS FROM BMR
The experts at BMR Fabrication have taken Mustang control arm design to a new level, integrating track-tested geometry with new construction techniques to create the ultimate 
S197 Mustang control arm.
By utilizing 1.5" x 2.0" boxed steel tubing with an oversize poly bushing, BMR's new Control Arms can handle launch after launch. Boxed tubing is narrower yet stronger than round tube designs, allowing BMR to use a thicker bushing hat to cushion torsional load. Bushing diameter has been increased from 1-5/8" to 1-3/4", and sleeve thickness has been upgraded from .095" to .156" for maximum protection.
For more information visit www.bmrfabrication.com
BLACK OUT GAUGES
B&M’s all new Black Out Gauges offer a completely new look in gauge design. When the ignition key is switched off, the gauges black out and reveal only their aluminum-anodized 
bezel. Once the ignition key is switched to the on position, the gauges come to life! High intensity LED back lighting provides a gauge that is easily readable with a unique appearance.
A 270-degree sweep on the dial face indicates accurate readings throughout the entire range on these precision electronic gauges. Light blue numbers with a red LED pointer provide a dynamic look for simple viewing, especially in low light.
For more information contact visit www.bmracing.com