 |
 |
|||||||
 |
 |
|
||||||
|
 |
"XUV" for the New Chevrolet Avalanche
Chevrolet's distinctive new Avalanche is touted for its multi-purpose functionality, and SNUGTOP brings it to the next level with the "XUV" cap. The uniquely styled cap is a perfect compliment to the Avalanche's bold lines, and it gives the vehicle an "SUV-like" appearance. It's clearly the "finishing touch!" The "XUV" cap has been embraced by Chevrolet and is licensed by General Motors Corp. It is available through Chevrolet dealers nationwide. The cap incorporates a built-in roof rack with husky 2" tubular rails. A number of accessory devices are available for the rack, which can be used to carry bicycles, skis, snowboards, etc. Important technical features of the SNUGTOP "XUV" include 1-piece reinforced fiberglass construction, a form fit over the clading-covered bed rail, and a finish to match factory colors using the DuPont Chroma Premier basecoat/clearcoat process. SNUGTOP® backs each cap with a Lifetime Structural Warranty, as well as a Lifetime Paint Warranty -the best in the business. Other key attributes of the SNUGTOP® "XUV" cap include a special drain channel that diverts the flow of water when the tailgate door is open, an integrated LED third brakelight, and a rotary latch locking system. For additional information about the "XUV" cap and other SNUGTOP® fiberglass caps & tonneau covers, call SNUGTOP at 562-432-5454 or visit the firm's website: www.snugtop.com. Stainless Works introduces Muscleflow Headers for Big Block 63-82 Corvettes
Stainless Works introduces its new Muscleflow performance headers for Big Block 63-82 Corvettes. Manufactured from 304 stainless, the headers feature ¼" thick, CNC laser cut flanges, and CNC mandrel bent 16 guage 2" primary tubes. Stainless Works headers are designed for easy installation and will work with either undercar exhaust or the available adapters allow for a bolt on installation with Stainless Works factory side exhaust. The headers are completely tig welded together, and are available in either a mill or polished finish. The collector is available with either a slip fit design, to maximize ground clearance, or a 3 bolt flange. Custom sizing and installed oxygen sensor bungs are also available. Stainless Works offers a limited lifetime guarantee against defects in materials and workmanship, so this is the only set of headers available that will last as long as your classic Corvette! Stainless Works manufactures high quality CNC mandrel bent headers, exhaust systems, mufflers and components for musclecars, street rods, street machines, trucks, sport compact, and motorcycles. The company sells both private label products and products under the Stainless Works brand. Stainless Works products include: 65-73 Mustang Tri-Y headers and exhaust, 55-66 Thunderbird exhaust, 67-81 Camaro headers and chambered and non chambered exhaust, 64-72 Chevelle headers and exhaust, 55-64 Chevy exhaust, 55-89 Corvette exhaust and sidepipes, stainless mufflers, clamps, bends, and air intake tubes. For more information, contact Stainless Works: |
|
||||||
|
Copyright 1999-2002, Drag Racing Online and Racing Net Source |
