DESIGN ENGINEERING'S RADIATOR RELIEF® SOLVES MAJOR COOLING PROBLEMS

DEI Radiator Relief (p/n 040104) is a proven coolant additive that provides up to 30 degrees reduction in engine operating temperatures, and 50 percent quicker warm-up time-a benefit for those cold morning start ups. Radiator Relief is compatible with water and all types of anti-freeze products, plus block sealants, leak-stop products and other cooling system additives. It is compatible with all metals: aluminum, brass, iron, magnesium and steel.

A single 32-fluid ounce (1 qt/945 ml) bottle of Radiator Relief will treat a 15-qt (14.175 L) cooling system. Remove a quart of coolant from the cooling system and replace with Radiator Relief. No pre-mixing or other preparations are required.

DEI Radiator Relief is for all internal combustion engines, for street, commercial and competition use and is for use in all climates.

For more information on DEI Radiator Relief and other DEI thermal tuning products, visitÝwww.designengineering.com, call 800-264-9472 or email: sales@DesignEngineering.com.

FLAME-THROWER BILLET DISTRIBUTOR FROM PERTRONIX

PerTronix's new plug and play billet distributor for small and big block Chevy applications is designed to provide maximum ignition performance and easy installation all at a price you can afford.

This distributor allows you to upgrade your outdated points or stock electronic distributor with a performance proven distributor that features the patented Ignitor II electronic ignition module and a CNC machined 6061 T-6 polished billet housing and deck. PerTronix electronics is also compatible with any inductive ignition system coil, but high RPM performance can be improved when used with their low resistant (0.6 ohm) Flame-Thrower II coil. If you're using a multi-spark CD ignition box, no problem, the PerTronix distributor is compatible. Additional features include a tempered .500 diameter shaft with low torsion displacement; an upper roller bearing and lower self-lubricating oil impregnated copper powder metal bushing and a durable machined heat-treated gear. Distributors come with a factory set performance curve, a mechanical advance limiting adjustment and small high dielectric strength cap and rotor for installations with tight firewall clearance. For more information contact your local performance retailer or call PerTronix at 909-599-5955

PRECISION GEAR’S PRO MOD TRANSMISSION AND DIFFERENTIAL YOKES

Designed to eliminate the U-joint breakage now rampant in the Pro Mod ranks, these new 1480 series billet steel yokes have proven themselves in competition. Precision machined to fit 32 spline Lenco and Liberty transmissions and the 35 spline 9” & 9.5” pinion shafts, U-joint failure is now a thing of the past. Complete driveshaft assemblies are also available. For more information or to place an order contact, Precision Gear, 12351 Universal Dr., Taylor MI (800) 524-0804. WWW.PRECISIONGEAR.COM