5/1/06
PROFORM INTRODUCES ADJUSTABLE BILLET FUEL
LOG FOR RACE SERIES AND HOLLEY 4150/4500 CARBS
The log has leak-proof sleeves that are sealed with four O-rings, allowing the log to expand 13.25 inches. This makes the Adjustable Fuel Log fit a wide range of carburetors having various fuel-bowl configuration, including all PROFORM Race Series Carburetors as well as Holley 4150 and 4500 models.
Each log includes carburetor stanchions with #8 A/N female fittings. The log's inlet side comes with both 3/4"-hex #6 and #8 A/N fittings. Outlet is 3/8" NPT to allow more room for a regulator.
The Adjustable Billet Fuel Log is available in two finishes: anodized PROFORM Purple (PN 67183PU, shown) or Natural billet aluminum (PN 67183B).
For more information visit www.proformparts.com.
PRECISE FUEL PRESSURE CONTROL FROM PROFESSIONAL PRODUCTS™
The new PowerFlow™ adjustable 3-port regulator from Professional Products™ can support a carbureted engine up to 650 horsepower and can be used for either gasoline or 
alcohol. It's available in two finishes, blue anodized (#10652, shown), or aluminum finish (#10653).
This PowerFlow fuel regulator features one 3/8-NPT return port, three 3/8-NPT inlet/outlet ports, 4.5 to 9 PSI adjustability and .437 (7/16-inch) restriction. Professional Products PowerFlow regulator flows approximately 150 GPH, but for higher than 650 HP two regulators are recommended. The unit can be mounted using the supplied bracket and a 1/8-NPT port at the front provides mounting for a pressure gauge.
For more information, visit www.professional-products.com.
B&M HOLESHOT AND NITROUS HOLESHOT
CONVERTERS FOR FORD, GM AND
CHRYSLER TRANSMISSIONS
The Nitrous HoleShot converter with anti-ballooning plates is specifically intended to harness the horsepower of nitrous equipped engines. The Nitrous HoleShot also offers a furnace-brazed impeller, heavy-duty needle bearing between the stator and impeller, furnace brazed turbine and a precision steel alloy pump drive tube. Offered in 2400, 3000 and 3600 rpm stall speeds, the Nitrous HoleShot is THE heavy-duty converter for GM, Ford and Chrysler transmission.
The standard HoleShot converter can be used in applications up to 450 lb-ft. of torque. Available in 2000, 2400, 3000 and 3600 rpm stall speeds.
For more information visit www.bmracing.com.
FULL-RACE CUSTOMER SERVICE FROM RACEPUMPS
Company founder and chief engineer Howard Stewart is proud to announce the NEW RACEPUMPS TECH LINE, which will offer customer support Monday through Saturday, 9:00am - 9:00pm EST.
The new tech line, 336-476-9583, along with the redesigned RacePumps.com website, offer customers complete technical support to ensure hassle-free installation and maximum performance.
For more information about RacePumps' complete line of fuel system accessories, visit www.racepumps.com or call 336-476-9583. RacePumps, 6006 Ball Park Rd. Unit G, Thomasville, NC 27360, Dealer Inquiries: 336-476-9720 Fax: 336-476-5040
 |
|
|
|
 |